It is manufactured in two versions: A direct low pressure (DLP) system and anindirect low pressure (ILP) System. Use of each version is determined by the type and size of the enclosure.
The BlazeCut® system works by using an extinguishing agent charged within a cylinder or within their innovative tube and installed into the area requiring fire protection.
In the event of a fire, at the engineered temperature the fire degrades the storage tube which melts to form a nozzle which automatically releases the extinguishing agent. This action acts to suppress the fire and when used with a factory fitted pressure switch, can activate other fire alarm triggers that will effect an emergency response to prevent the further spread of fire.
There are two types of systems available, the T Series tube system and the C Series cylinder system. Only the C Series offers both ILP and DLP release of the extinguishing agent.
IT
Electrical
Catering
Automotive
It is also likely that insurers may also look approvingly on the installation of BlazeCut® fire suppression systems and view them as a positive approach to risk management by companies who choose to install them. This offers additional benefit if this further precaution results in more favourable insurance terms.
To view the T Series range click here To view the C Series range click here
The BlazeCut® Company has a global sales head office in Sydney, Australia, a manufacturing facility in Slovakia, Central Europe and worldwide sales and after care support delivered from the above as well as the UK, America, Thailand and South Africa.All BlazeCut® products have been fully certified and have undergone rigorous testing to gain CE, ISO and AQAP approval. BlazeCut® is a registered trademark of BlazeCut s.r.o. and is recorded in the Register of Community Trade Marks.
Please note Tecserv only operate within the United Kingdom – any work outside of this region cannot be considered.
